50 found, showing page 2 of 2
$15.99
*1/2QCX3/8OD STRT VALVE
Make water supply stop installation quickly with the 1/2" x 3/8" Quick-Connect 1/4 turn straight valve water supply stops featuring Watts Quick-Connect technology. The revolutionary quick-connect ends work seamlessly with any 1/2" copper, PEX, or CPVC pipe. Simply make sure pipe is free of burrs, mark 1-1/2" from end of pipe and push the stop onto the pipe making sure stop is completely seated to the line marked on the pipe and it's ready to go. A minimum of 3-1/2" of pipe from the floor or wall is needed to insure correct installation. Quick-Connect Stops require no special tools and can be easily removed by pulling back on the collet ring and reused if needed. Bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$69.99
3/4" CHECK VALVE
As required by plumbing codes in some areas to provide residential protection for public water supplies. For installations immediately downstream from residential water meters. Bronze body construction. F.I.P.S. connections. Can be installed horizontally or vertically. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$109.99
3/4" WATR PRESSURE VALVE
Lead-free series N45 standard capacity water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a bronze body construction, stainless steel integral strainer, thermoplastic seat and cage, thermal expansion bypass, and sealed spring cage for waterworks pit installations. Valves are available in Female threaded union or solder union inlet x NPT threaded Female outlet. 400 P.S.I. (27.6 bar) maximum working pressure, adjustable reduced pressure range from 25 to 75 P.S.I. (172 to 517 kPa) delivery pressure, standard factory reduced pressure setting is 50 P.S.I. Water temperature range: 33 deg. F. to 180 deg. F. Meets UPC, ASSE 1003, CSA standard B356, ANSI A112.26.2, Southern Standard Plumbing Code and IAPMO listed. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$119.99
1"FIP PRESUR REDUC VALVE
Lead-free series N45 standard capacity water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a bronze body construction, stainless steel integral strainer, thermoplastic seat and cage, thermal expansion bypass, and sealed spring cage for waterworks pit installations. Valves are available in Female threaded union or solder union inlet x NPT threaded Female outlet. 400 P.S.I. (27.6 bar) maximum working pressure, adjustable reduced pressure range from 25 to 75 P.S.I. (172 to 517 kPa) delivery pressure, standard factory reduced pressure setting is 50 P.S.I. Water temperature range: 33 deg. F. to 180 deg. F. Meets UPC, ASSE 1003, CSA standard B356, ANSI A112.26.2, Southern Standard Plumbing Code and IAPMO listed. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$11.99
1/2" CTS REPAIR COUPLING
Compression coupling available in 2 different sizes, has a brass body and brass nuts, rubber gaskets, rated 125 P.S.I. at up to 210 deg. F. The coupling fits both iron pipe and copper tube as listed and is for use in piping or repair of galvanized or copper pipe. Pipe must be restrained after installation. Lead-free.
View Details
$14.29
3/4" CTS REPAIR COUPLING
Compression coupling available in 2 different sizes, has a brass body and brass nuts, rubber gaskets, rated 125 P.S.I. at up to 210 deg. F. The coupling fits both iron pipe and copper tube as listed and is for use in piping or repair of galvanized or copper pipe. Pipe must be restrained after installation. Lead-free.
View Details
$34.99
1" SHARKBITE BALL VALVE
Brass ball valve with push fitting connections. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged.
View Details
$19.99
*2" PVC CHECK VALVE
Constructed of PVC, stainless steel spring loaded PVC poppet with neoprene seal. Rated at 200 P.S.I. at 72 deg. F. (Not for use with compressed air.) Solvent ends comply with ASTM B2466. Packed 1 per printed box. Import.
View Details
$7.99
*GATE VALVE SOLDER TYPE 1/2"
This valve is rated for a maximum of 200 P.S.I. For use with water, oil, air, and 125 P.S.I. steam. The valve should be used where full flow is desirable. Full port. Gate valves provide longest service life when used in full, open, or closed position. Nonrising, square end stem. Solder ends comply with ANSI B16.18. Cast-iron handle. Import.
View Details
